Products

Size: 50mm Type: Half saddle  Material: 316 Stainless Steel  Saddle Thickness: 1.1mm

Size: 50mm Type: Full saddle  Material: Steel  Coating: Electrogalvanizing ≥5µm Saddle Thickness: 1.2mm

Size: 50mm Type: Half saddle  Material: Steel  Coating: Electrogalvanizing ≥5µm Saddle Thickness: 1.8mm

Length: 50mm  Gauge: 10G Thread Length: Full Driver Size: Z2 Driver Type: Pozidriv Head Type: Panhead Finish: Zinc Comparable Product: ST102

Anchor Length: 50mm Anchor Diameter: 10mm Finish: Zinc Comparable Product: SA1050J, SA1050LOOSE, BIZ780283

Length: 50mm  Gauge: 12G Thread Length: Partial  Thread Type: T17 Head Type: 5/16 Finish: Galvanised  Comparable Product: T1250, BIZ780066

Length: 50mm  Gauge: 14G Thread Length: Partial  Thread Type: T17 Head Type: 5/16 Finish: Galvanised  Comparable Product: T1450

Length: 50mm  Drill Diameter: 5mm Thread Length: Full Driver Size: No2 Driver Type: Square Drive Head Type: Panhead Finish: Zinc Plated Comparable ...

Anchor Length: 50mm Anchor Gauge: 6.5mm Anchor Material: Zinc Plated  Nail Material: Zinc Plated  Anchor Head Type: Mushroom Comparable Product: MP...

Thread Length: 25mm Thread Diameter: 6.2mm (self drilling) Finish: Zinc Comparable Product: SHVSTWJ

Thread Length: 25mm Thread Diameter: 6.2mm (self drilling) Finish: Zinc Comparable Product: SHVSTW

Length: 50mm  Gauge: 8G Thread Length: Full Driver Size: Z2 Driver Type: Pozidriv Head Type: Panhead Finish: Zinc Comparable Product: ST82

Length: 50mm  Gauge: 8G Thread Length: Full Driver Size: No.2 Driver Type: Square Head Type: Panhead Material: Stainless Steel Comparable Product: ...

Length: 50mm  Gauge: 8G Thread Length: Full Driver Size: No.2 Driver Type: Square Head Type: Panhead Material: Stainless Steel Comparable Product: ...

Length: 50mm  Gauge: 8G Thread Length: Full Driver Size: No.2 Driver Type: Square Head Type: Countersunk Material: Stainless Steel Comparable Produ...

Length: 50mm  Gauge: 8G Thread Length: Full Driver Size: No.2 Driver Type: Square Head Type: Countersunk Material: Stainless Steel Comparable Produ...

Length: 50mm  Gauge: 8G Thread Length: Partial Driver Size: No2 Driver Type: Multi Drive Head Type: Countersunk Finish: Zinc Comparable product: MD...

Length: 50mm  Gauge: 8G Thread Length: Partial Driver Size: No2 Driver Type: Square Drive Head Type: Countersunk Material: Stainless Steel Comparab...

Length: 25mm  Gauge: 8G Thread Length: Full Driver Size: No2 Driver Type: Square Drive Head Type: Countersunk Material: Stainless Steel Comparable ...

Length: 50mm  Gauge: 8G Thread Length: Partial Driver Size: No2 Driver Type: Square Drive Head Type: Countersunk Finish: Zinc Comparable Product: S...

Length: 50mm  Gauge: 8G Thread Length: Partial Driver Size: No2 Driver Type: Square Drive Head Type: Countersunk Finish: Zinc Comparable Product: S...

Length: 50mm  Gauge: M10 Thread Length: Full Drive Type: 16mm Finish: Galvanised  Comparable Product: CS1050

Length: 50mm Diameter: 3mm Head Type: Panhead Driver Type: Pozi   Finish: Zinc Comparable Product: MS350

Length: 50mm Diameter: 4mm Head Type: Panhead Driver Type: Pozi    Finish: Zinc Comparable Product: MS450

Length: 50mm Diameter: 4mm Driver Type: Phillips Head Type: Panhead  Material: Stainless Steel Comparable Product: SSMS450

Length: 50mm Diameter: 5mm Head Type: Panhead Driver Type: Pozi   Finish: Zinc Comparable Product: MS550

Length: 50mm Diameter: 5mm Driver Type: Phillips Head Type: Panhead  Material: Stainless Steel Comparable Product: SSMS550

Length: 50mm  Gauge: M6 Thread Length: Full Drive Type: 10mm Finish: Galvanised  Comparable Product: CS650

Length: 50mm Diameter: 6mm Head Type: Panhead Driver Type: Pozi   Finish: Zinc Comparable Product: MS650

Length: 50mm Diameter: 6mm Driver Type: Phillips Head Type: Panhead  Material: Stainless Steel Comparable Product: SSMS650

Length: 50mm  Gauge: M8 Thread Length: Full Drive Type: 13mm Finish: Galvanised  Comparable Product: CS850

Anchor Length: 55mm Drill Diameter: 8mm Finish: Zinc Includes 1/8" Screw  Comparable Product: HWA455

Anchor Length: 55mm Drill Diameter: 8mm Finish: Zinc Includes 1/8" Screw  Comparable Product: HWA455

Anchor Length: 55mm Drill Diameter: 8mm Finish: Zinc Includes 1/8" Screw  Comparable Product: HWA455J, BIZ780043

The SFP185 is a 55 °C cooling fan limiter, used to protect oven fan motors and electronics by activating when internal temperatures rise above 55 °...