PV Racking

The Clenergy RUNNUR CR1-CT300M is a CR1 cable tray with a 300 mm cable laying width, supplied in 3 m lengths. It forms part of the RUNNUR cable tra...

The Clenergy PV-ezRack IC-FL/GE/6/150/B is a black anodised 150 mm inter clamp for 6 mm frameless PV modules. It uses glued EPDM rubber mats within...

The Clenergy PV-ezRack ER-IC-ST40B is a black anodised inter clamp for framed PV modules. Clenergy specifies this model for modules 40–42 mm high w...

The Clenergy EZ-CC-PV/4/L is a landscape universal cable clip designed to fix to the frame of a framed PV module and hold four cables.Key Features ...

The Clenergy PV-ezRack ER-S-STIIIA/S20 is a preassembled 20° single support for the SolarTerrace III-A ground-mount system, supplied with a 2800 mm...

The Clenergy PV-ezRack K-PM1A/ECO is a PostMount 1-A kit for a single-panel ground-mount installation using ECO-Rail.Key Features PostMount 1-A ki...

A dependable inter-module clamp specifically engineered for framed solar modules around 35 mm thick. Constructed from anodized AL6005-T5 aluminum w...

The Clenergy PV-ezRack K-PM8A/ECO is the PostMount 8-A mounting system v2 for an eight-module pole-mounted array using ECO-Rails.Key Features Post...

The Clenergy PV-ezRack EZ-RB-65/45/12 is an EPDM rubber pad for use in compatible PV-ezRack mounting installations. Key Features Genuine Clenergy ...

The Clenergy PV-ezRack EZ-SS-PV DFendr Solar Skirt helps restrict access by birds, small rodents, leaves and wind-blown debris beneath framed rooft...

The Clenergy PV-ezRack ER-EC-ST46B is the black anodised 46 mm variant of Clenergy's standard end clamp for framed PV modules.Key Features 46 mm e...

The Clenergy PV-ezRack K-ECO/01/8/U is a SolarRoof kit for mounting eight framed PV modules on a compatible tile roof using ECO-Rail and Akashi uni...

The Clenergy PV-ezRack ER-SP-T50 is a splice for joining compatible T-Rail 50 sections.Key Features T-Rail 50 accessory: Designed specifically for...

The Clenergy PV-ezRack K-PM6A/XL is a PostMount 6-A v2 kit for pole-mounting six PV modules up to 2100 mm long. Key Features Configured for six la...

The Clenergy PV-ezRack ER-CP-2800/A is a 2800 mm foundation C-Post for the SolarTerrace II-A system.Key Features SolarTerrace II-A component: List...

Clenergy ECO Rail is a lightweight, high-strength aluminium mounting rail designed for fast and reliable solar PV installations across residential ...

The Clenergy PV-ezRack EZ-SC-PV is a DFendr Solar Skirt clip used to secure the matching skirt to framed PV modules without penetrating the module ...

The Clenergy PV-ezRack ER-R-T110/5200 is a 5200 mm T-Rail 110 for compatible SolarTerrace II-A and other PV-ezRack mounting arrangements specified ...

The Clenergy PV-ezRack ER-S-STIIA/D20 is a pre-assembled 20° double support for SolarTerrace II-A with a 3200 mm girder. Download the Clenergy Sola...

The ER-I-29/BA is a Klip-lok Interface for Longline 305 designed for use within PVezRack® SolarRoof mounting systems. The assembly is supplied in a...

The Clenergy PV-ezRack EZ-C-CD/T is a clamp used to secure a cable duct to T-Rail.Key Features T-Rail accessory: Designed for use with Clenergy T-...

The Clenergy PV-ezRack RC-ECO/G is a rail clamp for ECO-Rail with grounding/earthing pins.Key Features ECO-Rail compatibility: Designed for Clener...

The Clenergy PV-ezRack RL-COMT/Z/G/5 is a 5° rear leg assembly for Commercial Tilt installations on compatible tin and flat roofs. It includes a Z-...

The ER-I-29/AU is a Klip-lok Interface for Longline 305 designed for use within PVezRack® SolarRoof mounting systems. The assembly includes interfa...

The Clenergy PV-ezRack K-PM2A/ECO is the PostMount 2-A mounting system v2 for a two-module pole-mounted array using ECO-Rails.Key Features PostMou...

The Clenergy PV-ezRack C-U/30/46 is a universal clamp for framed PV modules with frame heights from 30 to 46 mm. It can be used as either an end cl...

Clenergy ECO Rail is a lightweight, high-strength aluminium mounting rail designed for fast and reliable solar PV installations across residential ...

The ER-I-34/05A/EZC is a Brooklyn Klip-lok Interface pre-assembly supplied with Tin Interface A and ezClick module components. The assembly is desi...

The Clenergy PV-ezRack ER-TL-10/15/PS is a pre-assembled adjustable tilt-leg set for installing PV modules between 10° and 15° on compatible SolarR...