Brands we represent

The Entelar EESOLAR-10KTL-LC0 is a single-phase smart hybrid inverter designed for home solar systems, offering 10 kW output capacity. It combines ...

The ER-SP-ELT/BA is a black anodized splice joiner designed to securely connect two lengths of Clenergy’s Elite Rail. Engineered for strength and c...

The ER-IC-ST30B/G is a high-quality inter-clamp with grounding pins designed for framed PV modules. It securely fastens panels to the ECO / EZ-Rack...

A premium flat cover designed to pair with the Clenergy RUNNUR CR1 Cable Tray (150 mm wide), the CR-CTFCS150M provides protection and labeling for ...

The CR-CS Counterbore Nut is a durable stainless steel fastener designed for use with Clenergy RUNNUR cable tray systems. Engineered to anchor tray...

The CR-SBS stainless steel splice bolt is specifically engineered for secure installation of Clenergy RUNNUR cable tray accessories. Ideal for spli...

The RC20 is a fixed-temperature (cut-out) thermostat set to 232 °C, designed to protect heating appliances such as ovens, fryers, or grills from ex...

The RC1 thermostat is a reliable, single-contact unit used in ovens to control internal temperature between 50 °C and 320 °C. It features break on ...

Restore the look and functionality of your appliance with these Universal Replacement Control Knobs. Designed to suit a wide range of ovens, cookto...

The Entelar EESTORE-5-E0 is a 5 kWh modular lithium iron phosphate (LFP) battery module designed for seamless integration with Entelar’s Smart Stri...

The ER-IC-ST35B Inter Clamp with Grounding Pins (Black Anodised) is part of Clenergy’s PV-ezRack Eco / SolarRoof racking system. Designed to join f...

Ensure safe and reliable grounding in your PV mounting system with the Clenergy EZ-GC-ST grounding clamp. Designed to fit under frame clamps on rai...

Durable and corrosion-resistant, the RUNNUR CR1 150 mm cable tray is designed for managing bulk cables in solar, commercial, and industrial install...

The Entelar EESTORE-5-C0 is the Power Module (5 kWh) component of the Entelar LUNA2000 modular energy storage system. It includes the integrated Ba...

This 1×4 mm² Earthing Cable  is a high-quality, PVC-insulated earth cable designed for reliable earthing and bonding in electrical installations. M...

The STK7DAIRY is a 7-inch stem thermostat built for dairy water heating applications. With a temperature range of 70-110 °C and no reset function, ...

Possibly the worlds best appliance knob solution! Our range of high quality replacement knobs are available in 5 different finishes & 5 differe...

Restore the look and functionality of your appliance with these Universal Replacement Control Knobs. Designed to suit a wide range of ovens, cookto...

2600W fan element Specifications2600W Fan oven elementModel InfoEquivalent: 5083H, FE-07, FE07, 220008, EUT22E Various SMEG and Westinghouse mod...

This black-anodized Clenergy inter clamp is designed for framed solar modules with a 35 mm profile, offering secure mid-module mounting and integra...

A sturdy Z-module assembly crafted for Clenergy’s ECO and T-rail systems, the EZ-Z-STBW includes a precision-machined bolt and large washer for rel...

Keep your MT-Rail cable tray installations clean, organised, and safe with the CO-MT/855 cover. This 855 mm long cover “clicks in” to the MT-Rail c...

Float Switch with Weight & 10m PVC Lead

The ST701 Contact Thermostat (50-70 °C) is a reliable temperature control switch designed for low-pressure domestic hot water systems. It includes ...

Restore the look and functionality of your appliance with these Universal Replacement Control Knobs. Designed to suit a wide range of ovens, cookto...

The DTSU666-HW 80A is a three-phase smart power sensor/meter designed for precise monitoring and control in solar PV, hybrid, or grid-tied energy s...

Securely join sections of the Clenergy RUNNUR CR1 cable tray using the CR1-SPM splice plate. This steel plate, with a protective Zn-Mg-Al alloy coa...

Built for tiled roofs on timber purlins, the ER-I-01 interface provides a reliable mounting point for Clenergy’s SolarRoof™ racking system. With a ...

The CR1-RM Riser Link is an accessory component for the Clenergy CR1 Cable Tray system, enabling vertical transitions in cable routing. It is used ...

The CR1-HM Hold-Down Unit is engineered to secure cable trays under load and environmental stress, preserving alignment and safety in RUNNUR’s CR1 ...

The ER-TL-10/15/BA is an adjustable tilt leg for Clenergy’s PV-ezRack SolarRoof systems, designed to permit optimal panel tilt angles of 10° or 15°...

The ER-IC-ST30B/G is a black-anodised inter clamp with integrated grounding pins for framed PV modules. Designed for use in Clenergy’s PV-ezRack EC...

This 1200 V DC Isolator (2-Pole, 32 A),  is a compact and reliable disconnect switch designed for isolating DC power in solar PV systems. Rated to ...

The RC40 Capillary Thermostat (30-110°C, Single-Pole, SPST) is built for domestic water heaters, ovens, and heating systems needing reliable high-t...

Restore the look and functionality of your appliance with these Universal Replacement Control Knobs. Designed to suit a wide range of ovens, cookto...

High-performance 2000 W (2 kW) incoloy heating element engineered for reliability and long service life. Crafted with Incoloy800 sheath and a robus...

The Trina Solar Vertex S+ 505W (TSM-505NEG18R.25) is a premium N-Type i-TOPCon dual-glass solar panel, designed for residential rooftops and commer...

Disconnection Point Label Kit Contains: Warning Hazardous DC Voltage  PV DP Shutdown Procedure  Solar Array, Open Circuit Voltage, Short Circuit C...

The ER-R-ECO/4700 ECO Rail is a structural aluminium rail designed for Clenergy’s PV-ezRack Solar mounting system. At a length of 4,700 mm, it prov...

A robust stainless steel interface designed for mounting Clenergy RUNNUR CR1 (and MT) cable trays to corrugated tin roofs. The CR-I-01 includes bol...

This 2×4 mm² Twin Solar DC Cable is a halogen-free, low-smoke, tinned copper cable designed for PV system connections. Manufactured to IEC 62930 st...

The DCI1500V4PDIN 1500 V DC Isolator (4-Pole, 35 A, DIN Rail Mount) is a high-voltage DC disconnect switch designed for solar PV systems up to 200 ...

The 10229/2 is a black knob with white lettering. Marked from LOW-HIGH & OFF. Suitable for applications with SM215K& SM700K simmerstats.  M...

2000W Universal Conventional Lower Bake ElementSpecificationsDimensions: 379mm x 325mmModel InfoEquivalent: CO-01, 9613, 1893

Restore the look and functionality of your appliance with these Universal Replacement Control Knobs. Designed to suit a wide range of ovens, cookto...

The Trina Solar Vertex S+ 445W (TSM-445NEG9RC.27) is a next-generation N-Type i-TOPCon bifacial dual-glass solar module, delivering up to 22.3% eff...

The Trina Solar Vertex S+ 440W (TSM-440NEG9RC.27) is a next-generation N-Type i-TOPCon bifacial dual-glass solar module, delivering up to 22.3% eff...

The ER-IC-28/42/L50/G/BA is a Zano Inter Clamp designed for framed PV modules with frame heights between 28 and 42 mm. With a 50 mm clamp length an...